Single-Use Bioprocess Products

Flexible Single-Use Solutions for Biopharmaceutical Process
View More
Single-Use Bioprocess Products
Biopharmaceuticals are the application of biological technologies such as cell culture, fermentation and purification to the production of medicine. Biopharmaceutical production typically involves upstream cell culture and fermentation, harvesting and downstream purification, concentration, virus filtration, sterile filtration and final filling.

Dreure's single-use for bioprocess solution which is widely used in upstream and downstream biopharmaceutical manufacturing. Dreure hasrich experience in single-use technology, providing single-use solutions for storage and transportation, liquid storage, fluid transfer and final filling. Help you accelerate process scale-up, accelerate time to market, improve production efficiency and reduce costs.

Single-Use Bioprocess Products

Products Range

Quality Control and Assurance

Dreure's quality system based upon the cGMP system and certified by the ISO9001 quality system. All of critical process step are finalized in the cleanroom Class ISO 7 and Class ISO 5. All of operators should be trained and qualified. The quality control by the in-coming raw material, in-process monitoring and final product batch releasing testing, and documentation system ensure product and process consistency while enabling continuous improvement.
img of Quality Control and Assurance
01
Quality Control Starting From Suppliers Qualification of Raw Materials

All our raw materials are received according to internal standards and applicable regulations. Each raw material and|or component is put through prior qualification dependent on the final use. This qualification includes a list of required statements from the supplier that is of the component and|or raw material that are in contact with the product flow.

Beyond these requirements, Dreure perform a qualification of the proposed component and|or raw material internally. For raw materials, the internal qualification will include machinability and physical performance of the bags made with this raw material. For components, the qualification will be centered around the testing of the assembly of the new component with other components and|or bags that will be attached.

In-coming materials are inspected upon arrival at Dreure against approved control specifications. Only approved materials will be allowed to be used in production of single use manufactured by Dreure.

img of Quality Control Starting From Suppliers Qualification of Raw Materials
02
Management of Batch Identification for Quality Traceability

Dreure has an upstream traceability system for in coming raw materials and a downstream traceability system for customers production batch.

This is based on the establishing of a batch file for each product manufactured according to the applicable procedure. The batch file includes more particularly the following information:

  • · Results of in-process controls
  • · Equipment number
  • · The batch numbers of the raw materials and components used
  • · The operators identification
  • · The machine parameters(where applicable)
  • · The tooling used (where applicable)
  • · The dates of manufacture.

QA responsible for collecting all of batch file and archive after production, With this system, it is possible to work back through the history of a product and to seek the causes of any deviation. Meanwhile, the product shipped to the customer has its sales record and batch number which for the traceability if any

img of Management of Batch Identification for Quality Traceability
03
In-process Control and Batch Release for Final Product

Quality controls are performed at critical process stages during the manufacturing. Some of these controls are listed below (other specific controls can be performed that are not listed and depend on the specific application of the product):

  • ·Product conformity against technical drawing
  • ·Visual inspection (seals, particles or contamination, film, assembly, etc.)
  • ·Air leak test
  • ·Dimensional check
  • ·Product packaging controls
  • ·Product labeling controls

After production, representative samples of finished products are tested.As the test result is acceptable, every batch of finished products will be released by Quality Assurance before it can be shipped to the customer. A Certificate of Release is issued for each batch of finished product that is shipped from Dreure.

img of In-process Control and Batch Release for Final Product
Need a Customized Packaging?

More About Dreure

  • About Dreure

  • Our Factory

  • Quality Control

  • Technology

  • Certificates

  • Packaging Solutions

Dreure was established in the year of 2014, which is a manufacturer specializing in the research and production of ultra-clean polymer films and products.With our early roots in polymer films and our aggressive product development into ultra clean polymer products, we have become the reliable supplier within the Pharmaceuticals and Semiconductor Industries
Read More
Dreure has the total area of workshop is 40,000+㎡,with ISO 7 cleanroom in the area of 10,000㎡ and ISO 5(class A) in the area of 500㎡.
Read More
Quality by design and Control by process is the philosophy of Dreure. All our manufacturing sites are certified according to ISO 9001 and cGMP, and our staff is fully committed to respecting applicable cGMP to ensure consistent quality for the pharmaceutical industry.
Read More
Dreure is a multilayer film manufacturer. We deliver films to our customers by applying all of our capabilities honed over the years, e.g., our co-extrusion multilayer technology system and structure applicable clean environment made possible by combining raw materials knowledge and proprietary equipment, after-sales maintenance with extensive knowledge of customer sites, bag-making technology excelling in special processing, support based on our track record in various fields and applications.
Read More
Dreure's products and manufacturing processes are certified to ISO9001 standards. And the certificate of ISO 45001 and ISO 14001 are issued too. Meanwhile supported by more than 50 related technical patents,
Read More
Our broad package solution with different polymers and functions to bring innovative products to market. Dreure offers a customizable packaging solution tailored to your product profile. We support specification setting, early testing and scale-up with the technical and regulatory expertise.
Read More

Primary Flexible Packaging Bag FAQ

  • Can film dimensions and thickness be customized?
    Yes. Thickness, width, tolerances and roll, sheet or tubular-film supply formats can be developed around project requirements and manufacturing feasibility.
  • Can Dreure support a new bag format?
    Yes. New bag formats can be reviewed through film selection, geometry definition, sample production, sealing evaluation and documentation confirmation.
  • Can bags be supplied for sterilization applications?
    Autoclave and irradiation-related projects can be reviewed against the selected material, finished bag configuration, sterilization conditions and available qualification evidence.
  • What release documents are available?
    Available documents may include the approved product specification, batch certificate, inspection records, traceability information and project-specific test or validation support documents.
Send Your Inquiry